Bamboo CNC Pneumatic V Grooving Machines
It is wholly welded by steel to eliminate internal stress by vibration aging, so that our machine is better in strength, rigidity and stability than the same products at home and abroad. It chooses PLC HMI programming and CNC touch display, easy for operating personnel to understand and set accurate position.
It adopts full pneumatic control, which make this machine environmentally friendly and save the energy cost. It has no side effect in human health.
Model: HRK
Material: Stainless steel, Mild steel, Aluninum, etc.
Groovering length: 4000-6000 mm
Control type: 4-6 Axis CNC control
BAMBOOCNC HRK CNC Pneumatic Sheet Metal V Grooving Machines
- This equipment is fully CNC V Groover Machine for metal sheet.
- It adopts advanced CNC system and innovative design with the advantages of high processing precision, simple operation, no noise, no vibration and so on.
- It is widely used in the sheet metal V-groove, U-groove and other irregular groove processing (including stainless steel, aluminum, aluminum plate, copper, iron, plastic, wood, acrylic panels and other special plates.).
- Particularly, it is applicable to the V-groove processing of sheet metal before bending.
- The HRK CNC metal sheet slot machine is an upgraded product researched and developed by the company’s scientific research personnel on the basis of metal sheet slot machines at home and abroad. This machine has all the performance of the traditional model, and fully solves the customer’s actual operation process. A series of problems encountered.
- The equipment adopts steel plate welding and eliminates the internal stress through vibration and aging so that the entire model exceeds the equivalent strength at home and abroad in terms of strength, rigidity and stability.
- The equipment adopts a rear feeding structure. The ingenious design of the universal ball makes the equipment not destroy the surface of the sheet during feeding and discharging. Adjustable movable table to ensure the accuracy of each part of the groove depth.
- The machine adopts the processing technology of three front and rear molding knives, which greatly reduces the iron scrap produced during processing. Compared with the traditional five knives, the processing precision is greatly improved, and the bottom of the five knives processed may produce more Bottom lines.
- The equipment adopts all-pneumatic clamping material, pressing material, and quick work, so that the processed product is free from pinch marks, indentation, and tracking of all work processes. The lighting system in the work area is even more extreme.
- The device uses PLC man-machine interface programming. The operator is easy to learn and understand, and the positioning is accurate.
- The equipment clamps and presses are all pneumatically controlled. This makes the machine reach a high point in the concept of energy saving and environmental protection.
- The overall shape of the equipment is concise, generous and beautiful. It adopts a box-type structure and meets the operating habits of various technicians, enabling operators to fully meet production and technical requirements during work.
- Beveling available.
- Available to groove not from one side of plate and end not at another side.
- The minimum distance from the side of plate to the first groove line is 10-12 mm.
- The minimum distance side of plate to groove is 100×100 mm.
- Grooving from one point to another point.
- Environment protection (no hydraulic oil).
HRK series CNC metal slotting machine has compact structure, reliable performance and convenient operation. The wall plate adopts a frame structure and is not deformed permanently. Its structure is mainly composed of three groups of servo motor drive systems, pneumatic clamp system and main steel frame.
The Y-axis system of this equipment consists of the main motor ECMA-F21830 AC servo motor, star speed reducer synchronous belt, synchronous wheel, high-precision gear rack, linear guide and other components.
Its function is that the servo motor drives the tool holder through the star type reducer to drive the tool holder to perform linear motion on the linear guide to provide planning power.
The X-axis system of this equipment consists of motor E21320 AC servo motor, timing belt, synchronous wheel, ball screw, linear guide, rear stopper, and drag clamp. Its function is that the motor drives the rear gear rack through the timing belt and the synchronous wheel to drive the rear gear rack to make a linear motion on the linear guide, so as to provide the rear gear drag mechanism with accurate positioning power.
The Z axis system of this equipment consists of motor C20604 AC servo motor, timing belt, synchronous wheel, ball screw, tool holder and other components. Its function is that the motor drives the tool holder to move linearly through the timing belt and the synchronous wheel drive ball screw to provide the tool holder mechanism with accurate positioning power.
The pneumatic system of this equipment is mainly divided into two groups. The pneumatic system of the dragging material is the component of the back gauge.
Its function is to provide clamping force when dragging the material behind the backstop. The clamp pneumatic system is a router Clamp the plate beforehand to prepare for planning.
The electrical control system of this device consists of PLC, driver, touch screen, electronic control components, electrical cabinets and other accessories. The electrical cabinet is installed inside the wall of the machine, which is easy to maintain and has strong protection performance. Through the touch screen control can achieve all the work of the equipment.
Bamboo CNC Hydraulic V Grooving Machine
It is wholly welded by steel to eliminate internal stress by vibration aging, so that our machine is better in strength, rigidity and stability than the same products at home and abroad. It chooses PLC HMI programming and CNC touch display, easy for operating personnel to understand and set accurate position. It adopts full pneumatic control, which make this machine environmentally friendly and save the energy cost. It has no side effect in human health.
Brand: BAMBEOCNC
Model: HRY
Material: Stainless steel, Mild steel, Aluninum, etc.
Groovering length: 4000-6000 mm
BAMBOOCNC HRY CNC Hydraulic V Grooving Machines
- This equipment is fully CNC V Groover Machine for metal sheet.
- It adopts advanced CNC system and innovative design with the advantages of high processing precision, simple operation, no noise, no vibration and so on.
- It is widely used in the sheet metal V-groove, U-groove and other irregular groove processing (including stainless steel, aluminum, aluminum plate, copper, iron, plastic, wood, acrylic panels and other special plates.).
- Particularly, it is applicable to the V-groove processing of sheet metal before bending.
- The HRK CNC metal sheet slot machine is an upgraded product researched and developed by the company’s scientific research personnel on the basis of metal sheet slot machines at home and abroad. This machine has all the performance of the traditional model, and fully solves the customer’s actual operation process. A series of problems encountered.
- The equipment adopts steel plate welding and eliminates the internal stress through vibration and aging so that the entire model exceeds the equivalent strength at home and abroad in terms of strength, rigidity and stability.
- The equipment adopts a rear feeding structure. The ingenious design of the universal ball makes the equipment not destroy the surface of the sheet during feeding and discharging. Adjustable movable table to ensure the accuracy of each part of the groove depth.
- The machine adopts the processing technology of three front and rear molding knives, which greatly reduces the iron scrap produced during processing. Compared with the traditional five knives, the processing precision is greatly improved, and the bottom of the five knives processed may produce more Bottom lines.
- The equipment adopts all-pneumatic clamping material, pressing material, and quick work, so that the processed product is free from pinch marks, indentation, and tracking of all work processes. The lighting system in the work area is even more extreme.
- The device uses PLC man-machine interface programming. The operator is easy to learn and understand, and the positioning is accurate.
- The equipment clamps and presses are all pneumatically controlled. This makes the machine reach a high point in the concept of energy saving and environmental protection.
- The overall shape of the equipment is concise, generous and beautiful. It adopts a box-type structure and meets the operating habits of various technicians, enabling operators to fully meet production and technical requirements during work.
- Beveling available.
- Available to groove not from one side of plate and end not at another side.
- The minimum distance from the side of plate to the first groove line is 10-12 mm.
- The minimum distance side of plate to groove is 100×100 mm.
- Grooving from one point to another point.
- Environment protection（no hydraulic oil).
HRK series CNC metal slotting machine has compact structure, reliable performance and convenient operation. The wall plate adopts a frame structure and is not deformed permanently. Its structure is mainly composed of three groups of servo motor drive systems, pneumatic clamp system and main steel frame.
The Y-axis system of this equipment consists of the main motor ECMA-F21830 AC servo motor, star speed reducer synchronous belt, synchronous wheel, high precision gear rack, linear guide and other components. Its function is that the servo motor drives the tool holder through the star type reducer to drive the tool holder to perform linear motion on the linear guide to provide planning power.
The X-axis system of this equipment consists of motor E21320 AC servo motor, timing belt, synchronous wheel, ball screw, linear guide, rear stopper, and drag clamp. Its function is that the motor drives the rear gear rack through the timing belt and the synchronous wheel to drive the rear gear rack to make a linear motion on the linear guide, so as to provide the rear gear drag mechanism with accurate positioning power.
The Z axis system of this equipment consists of motor C20604 AC servo motor, timing belt, synchronous wheel, ball screw, tool holder and other components. Its function is that the motor drives the tool holder to move linearly through the timing belt and the synchronous wheel drive ball screw to provide the tool holder mechanism with accurate positioning power.
The pneumatic system of this equipment is mainly divided into two groups.
The pneumatic system of the dragging material is the component of the back gauge.
Its function is to provide clamping force when dragging the material behind the backstop.
The clamp pneumatic system is a router Clamp the plate beforehand to prepare for planning.
The electrical control system of this device consists of PLC, driver, touch screen, electronic control components, electrical cabinets and other accessories. The electrical cabinet is installed inside the wall of the machine, which is easy to maintain and has strong protection performance. Through the touch screen control can achieve all the work of the equipment.
Bamboo NC Gantry V Groover Machines
It is wholly welded by steel to eliminate internal stress by vibration aging, so that our machine is better in strength, rigidity and stability than the same products at home and abroad. It chooses PLC HMI programming and CNC touch display, easy for operating personnel to understand and set accurate position. It adopts full pneumatic control, which make this machine environmentally friendly and save the energy cost. It has no side effect in human health.
Brand: BAMBEOCNC
Model: HRL
Material: Stainless steel, Mild steel, Aluninum, etc.
Groovering length: 3200 / 4000 / 6000 mm
Control type: 4 Axis CNC control
BAMBOOCNC HRL NC Gantry V Groover Machines
- The machine adopts frame structure design ,50 mm high strength low alloy structure steel countertops, good integral rigidity of the machine tool.
- The beams of this series is solid without moving, the work piece material can be sent by the evacuation mechanism, and as for work tables, they were made of carbon tool steel, hardness of which can be 55-60HRC (ordinary table<30HRC) after high-frequency surface hardening, which makes the worktable much harder than the hardness of stainless steel, and completely solve the phenomenon of the work surface grooves appeared due to low hardness of traditional machines, to ensure the work surface flatness ≤ ± 0.03mm, completely solve the reduction of the accuracy of the V-grooves due to deformation of work table surface, prolonged the life of the equipment. Around the worktable there are care feeding device to prevent scratches during processing of sheet metal.
- The forward-backward knife rest (Y1 shaft) movement, up-down knife rest (Z shaft) movement, forward-backward end pressure (Y2 shaft) movement are controlled by CNC system, AC servo motor, ball screw drive. It has the advantages of high control accuracy, positioning precision.
- The beam of the machine is fixed, and work is fed by feeding mechanism. Anvil of workbench can be debugged to guarantee that the flatness of working plane is within 0.003 mm.
- Tool carrier movement (left and right) adopts synchronous belt drive, with stable and efficient cutting process and flat and smooth cutting surface.
- The machine adopts floor type numerical control post-feeding device, with high positioning precision, stable drive and large processing scope.
- Description of numerical control system and main components:
Numerical control: Japan Mitsubishi three-axis numerical control system.
Servo motor: Yasukawa brand 1.3KW 0.8kw
MHMA servo motor Converter: Japan Mitsubishi, power 2.2kw
Spindle motor: German sew, power 1.5kw
Proximity switch: German Turck 1805. - Rolling lead rail pair: GGB45AA rolling lead rail supplied by the well-established manufacturer-Nanjing Technical Equipment Manufacturing Co., Ltd.
- Ball screw: FFZD4006F-3-P5 and FFZD2004T-3-P5 ball screw supplied by the well-established manufacturer-Nanjing Technical Equipment Manufacturing Co., Ltd.
- Tool machine cable: The new-generation highly flexible zipper cable manufactured in Taiwan.
- Japanese Yasukawa Servo-system in combination of Torque rotation control, speed control and position control, the system can run at high speed, precision, with high frequency response. The setting time is short. The internal amplification can be adjusted automatically. The volume is small, which can be operated and connected easily.
- Environment-friendly self-lubricating design (no hydraulic oil), low-friction controller.
- Equal load in four directions.
- High-precision, maintenance free.
- High-speed and low noise.
- Slide block is interchangeable.
- International standard specifications.
- Full oil seal.
- High-rigid in four lines of steel balls.
- Smooth function and novel circulation.
HRK series CNC metal slotting machine has compact structure, reliable performance and convenient operation. The wall plate adopts a frame
structure and is not deformed permanently.
Its structure is mainly composed of three groups of servo motor drive systems, pneumatic clamp system and main steel frame.
The Y-axis system of this equipment consists of the main motor ECMA-F21830 AC servo motor, star speed reducer synchronous belt, synchronous wheel, high precision gear rack, linear guide and other components.
Its function is that the servo motor drives the tool holder through the star type reducer to drive the tool holder to perform linear motion on the linear
guide to provide planning power.
The X-axis system of this equipment consists of motor E21320 AC servo motor, timing belt, synchronous wheel, ball screw, linear guide, rear stopper, and drag clamp. Its function is that the motor drives the rear gear rack through the timing belt and the synchronous wheel to drive the rear gear rack to make a linear motion on the linear guide, so as to provide the rear gear drag mechanism with accurate positioning power.
The Z axis system of this equipment consists of motor C20604 AC servo motor, timing belt, synchronous wheel, ball screw, tool holder and other components. Its function is that the motor drives the tool holder to move linearly through the timing belt and the synchronous wheel drive ball screw to provide the tool holder mechanism with accurate positioning power.
The pneumatic system of this equipment is mainly divided into two groups.
The pneumatic system of the dragging material is the component of the back gauge.
Its function is to provide clamping force when dragging the material behind the backstop.
The clamp pneumatic system is a router Clamp the plate beforehand to prepare for planning.
The electrical control system of this device consists of PLC, driver, touch screen, electronic control components, electrical cabinets and other accessories. The electrical cabinet is installed inside the wall of the machine, which is easy to maintain and has strong protection performance.
Through the touch screen control can achieve all the work of the equipment.