Electric-Servo Full CNC Press Brake with DA52S 3+1 Axis Control
WC67Y NC Press Brake Machine has a whole steel welded structure, with internal stress eliminated by vibration aging technology, high strength, and good rigidity. It also has a torsion bar with hydraulics, an integrated hydraulic system and pressure control for adjustment of tonnage.
Model: MB8
Controller: DA52（DA58T/DA66T/DA69T/CT12PS Optional）
Control axes: 3+1 axis control (Y1, Y2, X+V)
Capabilities: 30T/1600 – 600T/6000
The elctrolyte servo system of this machine is an inner closing ring control system. It can check out the synchro discrepancies of the slide by the movement of the light ruler. And the electrolyte servo valve can correct the slide discrepancies. This can make the slide always be parallel to the working table. |
CNC control system
CNC control 3 axes(Y1,Y2,X)
Y1,Y2 AXES: control the stroke of left and right cylinder respectively.
X axis: control back gauge;
Optional axes:X1,X2,Z1,Z2,R1,R2
Optional Control system: Delem DA52, DA56, DA65w,DA66T
- CNC Series machines redesigned based on users preferences to become a unique machine with its individual electronic and mechanical features.
- CNC Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum level
- With its user-friendly CNC controller and low cost hydraulic maintenance.
- New CNC is exactly what you need for your production where complicated, sensitive, single or multiple bends on high speed are paramount.
- High quality and repetitive bending is obtained by using synchronized cylinders and valves.
- Automatic utilisation of all axes on startup.
- Rigid upper beam runs on 8-point bearings with bending precision of 0,01 mm.
- Well-known top and bottom tool brands are long lasting hardened and provide precise bending.
- All Bamboo machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel using the latest Technology.
- Chrome coated cylinders are machined with 0,001 mm precision and pistons are specially hardened.
- Original clamps are user friendly and machined with high precision.
- Front support arms are slidable along machine length and easy to adjust.
- Compact and well-known brand Bosch-Rexroth hydraulics are produced according to CE standards.
- Two photocells on sides for rear guard.
- Fast tool tightening.
- Optic linear scales are sensitive up to ± 0,01 mm.
- Synchronized working cylinders will give you the best bending result with its perfect repeatability ratio.
- 2 axis ultra strong back gauge system (X=1000 mm and R), with ± 0,01 mm. repeatability,
- by CNC controller, foldable back gauge fingers for reverse bending applications.
- SIEMENS electrical system.
- Automatic axis referencing when machine is turned on.
- Side guard is standard meeting CE regulations.
- Safety Standards(2006/42/EC):
1.EN 12622:2009 + A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009 - Front finger Protection (Safety light curtain).
- South Korea Kacon Foot Switch (Level 4 of safety).
- Safety relay with Monitor the pedal switch and safety protection.
In the process of bending, the Angle of the bending workpiece is inconsistent due to the
certain amount of deformation between the slider and the workpiece, especially the hot-rolled
plate of stainless steel, which has large rebound force and large error.
This series bending machine adopts the workbench hydraulic automatic deflection
compensation mechanism, it is composed of a set of oil cylinder installed in the workbench,
and each compensation location of the oil cylinder, size is according to the slider, finite
element analysis of the deflection curve design compensation table, hydraulic compensation
is after the former three vertical plate, the relative displacement between the neutral versions
of the convex compensation, to achieve its principle is accomplished by elastic deformation
of steel itself raised, so the amount of compensation can be realized within the elastic
range in the workbench.
Detailed description
- Quick, one page programming
- Hotkey navigation
- 7” VGA colour TFT
- Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
- Crowning control
- Tool/material/product library
- USB, peripheral interfacing
- Advanced Y-axis control algorithms for closed loop as well as open loop valves
- “Hot-key” touch navigation
- 1″ high resolution colour TFT
- Up to 4 axes (Y1,Y2 + 2 aux. axes)
- Crowning control
- Tool / material / product library
- Servo and frequency inverter control
- Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
- TandemLink (option)
- USB memory stick interfacing
- Profile-T offline software
- 2D graphical touch screen programming mode
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface Profile-TL offline software
- 3D and 2D graphical touch screen programming mode
- 3D visualisation in simulation and production
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface
- Profile-T3D offline software
- Welded steel plate, the frame consists of right and left wall boards, working table, oil box, groove steel etc. Work table consist of 3 plates. The stress of the parts has been eliminated by vibration. The machine enjoys high accuracy and high strength and good rigidity.
- Hydraulic system is from Bosch -Rexroth, Germany.
- Adopt integrated hydraulic control system, more reliable and easy for maintenance.
- Reduced noise: the particular installation choices allow to obtain especially moderate noise levels on machines of average capacity.
- Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
- The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
- Electrical components and materials conform to international standards, safe and reliable, long life, strong anti-interference ability.
- Removable foot switch operation is provided.
- The electronic control components are of high quality and famous brand.
- The machine adopts ac 380V three-phase four-wire power supply, and the control circuit is ac 220V voltage.
- The main circuit of the motor has short circuit, overload and phase loss protection.
- The operation button is installed on the button table of the machine tool, and the electrical switch and indicator light are installed in the special electrical control box.
- The stop button of the oil pump is also the general button of the machine tool. When the oil pump stops working, the whole machine tool stops working.
- The machine is equipped with corresponding inching control button and emergency stop button.
- Guarantees the machine service life and reduce the noise when working.
- High Precision Back gauge is equipped with fine ball screw and guide linear
- Back gauge adopts horizontal installation shell structure with high stability, singe shell double guide rail, high precision, X-axixs drive, automatic CNC system.
CNC Backgauge
The Delem DA52s CNC controlled back gauge that automatically adjusts the X (depth) and R (heightl) axes to ensure your material is always positioned accurately, resulting in higher quality finished parts.
X -axes movements are driven by YASKAWA Servo Motors & Drives. Usingthe best components, such as HIWIN linear guides, ball screws.
X-axes movements Stroke 600mm, with X-axis speeds up to 350 mm/sec and accuracy to 0,01mm & Special design foldable back gauge fingers.
- Up punching dies will be cut into section as the requirement as below:
- 25mm 30mm 40mm 45mm 50mm 170mm 100mm right 100mm left.
- The equipped standard Dies, special non-standard mold is available under client’s requirement according to real workpiece situation.
Electric-Servo Full CNC Press Brake with DA53T Controller
WC67Y NC Press Brake Machine has a whole steel welded structure, with internal stress eliminated by vibration aging technology, high strength, and good rigidity. It also has a torsion bar with hydraulics, an integrated hydraulic system and pressure control for adjustment of tonnage.
Model: MB8
Controller: DA53T（DA52/DA58T/DA66T/DA69T/CT12PS Optional）
Control axes: 3+1 axis control (Y1, Y2, X+V)
Capabilities: 30T/1600 – 600T/6000
The electrolyte servo system of this machine is an inner closing ring control system.
It can check out the synchro discrepancies of the slide by the movement of the light ruler.
And the electrolyte servo valve can correct the slide discrepancies.
This can make the slide always be parallel to the working table.
CNC control system
CNC control 3 axes (Y1, Y2,X)
Y1, Y2 AXES: control the stroke of left and right cylinder respectively.
X axis: control back gauge;
Optional axes: X1, X2, Z1, Z2, R1, R2
Optional Control system: Delem DA52, DA56, DA65w, DA66T
- CNC Series machines redesigned based on users’ preferences to become a unique machine with its individual electronic and mechanical features.
- CNC Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum level
- with its user-friendly CNC controller and low-cost hydraulic maintenance.
- New CNC is exactly what you need for your production where complicated, sensitive, single or multiple bends on high speed are paramount.
- High quality and repetitive bending are obtained by using synchronized cylinders and valves.
- Automatic utilisation of all axes on startup.
- Rigid upper beam runs on 8-point bearings with bending precision of 0,01 mm.
- Well-known top and bottom tool brands are long lasting hardened and provide precise bending.
- All Bamboo machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel using the latest Technology.
- Chrome coated cylinders are machined with 0,001 mm precision and pistons are specially hardened.
- Original clamps are user friendly and machined with high precision.
- Front support arms are slidable along machine length and easy to adjust.
- Compact and well-known brand Bosch-Rexroth hydraulics are produced according to CE standards.
- Two photocells on sides for rear guard.
- Fast tool tightening.
- Optic linear scales are sensitive up to ± 0,01 mm.
- Synchronized working cylinders will give you the best bending result with its perfect repeatability ratio.
- 2 axis ultra-strong back gauge system (X=1000 mm and R), with ± 0,01 mm. repeatability,
- by CNC controller, foldable back gauge fingers for reverse bending applications.
- SIEMENS electrical system.
- Automatic axis referencing when machine is turned on.
- Side guard is standard meeting CE regulations.
- Safety Standards(2006/42/EC):
1.EN 12622:2009 + A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009 - Front finger Protection (Safety light curtain).
- South Korea Kacon Foot Switch (Level 4 of safety).
- Safety relay with Monitor the pedal switch and safety protection.
In the process of bending, the Angle of the bending workpiece is inconsistent
due to the certain amount of deformation between the slider and the workpiece,
especially the hot-rolled plate of stainless steel, which has large rebound force and large error.
This series bending machine adopts the workbench hydraulic automatic
deflection compensation mechanism, it is composed of a set of oil cylinder
installed in the workbench, and each compensation location of the oil cylinder,
size is according to the slider, finite element analysis of the deflection curve design
compensation table, hydraulic compensation is after the former three vertical plate,
the relative displacement between the neutral version of the convex compensation,
to achieve its principle is accomplished by elastic deformation of steel itself raised,
so the amount of compensation can be realized within the elastic range in the workbench.
- Welded steel plate, the frame consists of right and left wall boards, working table, oil box, groove steel etc. Work table consist of 3 plates. The stress of the parts has been eliminated by vibration. The machine enjoys high accuracy and high strength and good rigidity.
- Hydraulic system is from Bosch -Rexroth, Germany.
- Adopt integrated hydraulic control system, more reliable and easy for maintenance.
- Reduced noise: the particular installation choices allow to obtain especially moderate noise levels on machines of average capacity.
- Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
- The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
- Electrical components and materials conform to international standards, safe and reliable, long life, strong anti-interference ability.
- Removable foot switch operation is provided.
- The electronic control components are of high quality and famous brand.
- The machine adopts ac 380V three-phase four-wire power supply, and the control circuit is ac 220V voltage.
- The main circuit of the motor has short circuit, overload and phase loss protection.
- The operation button is installed on the button table of the machine tool, and the electrical switch and indicator light are installed in the special electrical control box.
- The stop button of the oil pump is also the general button of the machine tool. When the oil pump stops working, the whole machine tool stops working.
- The machine is equipped with corresponding inching control button and emergency stop button.
- Guarantees the machine service life and reduce the noise when working.
- High Precision Back gauge is equipped with fine ball screw and guide linear
- Back gauge adopts horizontal installation shell structure with high stability, singe shell double guide rail, high precision, X-axixs drive, automatic CNC system.
CNC Backgauge
The Delem DA52s CNC controlled back gauge that automatically adjusts the X (depth) and R (heightl) axes to ensure your material is always positioned accurately, resulting in higher quality finished parts.
X -axes movements are driven by YASKAWA Servo Motors & Drives. Usingthe best components, such as HIWIN linear guides, ball screws.
X-axes movements Stroke 600mm, with X-axis speeds up to 350 mm/sec and accuracy to 0,01mm & Special design foldable back gauge fingers.
- Up punching dies will be cut into section as the requirement as below:
- 25mm 30mm 40mm 45mm 50mm 170mm 100mm right 100mm left.
- The equipped standard Dies, special non-standard mold is available under client’s requirement according to real workpiece situation.
Electric-Servo Full CNC Press Brake with DA58T Controller
WC67Y NC Press Brake Machine has a whole steel welded structure, with internal stress eliminated by vibration aging technology, high strength, and good rigidity. It also has a torsion bar with hydraulics, an integrated hydraulic system and pressure control for adjustment of tonnage.
Model: MB8
Controller: DA53T（DA52/DA58T/DA66T/DA69T/CT12PS Optional）
Control axes: 3+1 axis control (Y1, Y2, X+V)
Capabilities: 30T/1600 – 600T/6000
The electrolyte servo system of this machine is an inner closing ring control system. It can check out the synchro discrepancies of the slide by the movement of the light ruler. And the electrolyte servo valve can correct the slide discrepancies. This can make the slide always be parallel to the working table. |
CNC control system
CNC control 3 axes (Y1, Y2, X)
Y1, Y2 AXES: control the stroke of left and right cylinder respectively.
X axis: control back gauge;
Optional axes: X1, X2, Z1, Z2, R1, R2
Optional Control system: Delem DA52, DA53T, DA58T, DA66T,DA69T
- CNC Series machines redesigned based on users’ preferences to become a unique machine with its individual electronic and mechanical features.
- CNC Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum level
- with its user-friendly CNC controller and low-cost hydraulic maintenance.
- New CNC is exactly what you need for your production where complicated, sensitive, single or multiple bends on high speed are paramount.
- High quality and repetitive bending are obtained by using synchronized cylinders and valves.
- Automatic utilisation of all axes on startup.
- Rigid upper beam runs on 8-point bearings with bending precision of 0,01 mm.
- Well-known top and bottom tool brands are long lasting hardened and provide precise bending.
- All Bamboo machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel using the latest Technology.
- Chrome coated cylinders are machined with 0,001 mm precision and pistons are specially hardened.
- Original clamps are user friendly and machined with high precision.
- Front support arms are slidable along machine length and easy to adjust.
- Compact and well-known brand Bosch-Rexroth hydraulics are produced according to CE standards.
- Two photocells on sides for rear guard.
- Fast tool tightening.
- Optic linear scales are sensitive up to ± 0,01 mm.
- Synchronized working cylinders will give you the best bending result with its perfect repeatability ratio.
- 2 axis ultra-strong back gauge system (X=1000 mm and R), with ± 0,01 mm. repeatability,
- by CNC controller, foldable back gauge fingers for reverse bending applications.
- SIEMENS electrical system.
- Automatic axis referencing when machine is turned on.
- Side guard is standard meeting CE regulations.
- Safety Standards(2006/42/EC):
1.EN 12622:2009 + A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009 - Front finger Protection (Safety light curtain).
- South Korea Kacon Foot Switch (Level 4 of safety).
- Safety relay with Monitor the pedal switch and safety protection.
In the process of bending, the Angle of the bending workpiece is inconsistent
due to the certain amount of deformation between the slider and the workpiece,
especially the hot-rolled plate of stainless steel, which has large rebound force and large error.
This series bending machine adopts the workbench hydraulic automatic
deflection compensation mechanism, it is composed of a set of oil cylinder
installed in the workbench, and each compensation location of the oil cylinder,
size is according to the slider, finite element analysis of the deflection curve design
compensation table, hydraulic compensation is after the former three vertical plate,
the relative displacement between the neutral version of the convex compensation,
to achieve its principle is accomplished by elastic deformation of steel itself raised,
so the amount of compensation can be realized within the elastic range in the workbench.
Detailed description
- 2D graphical touch screen programming.
- 15″ high resolution colour TFT.
- Bend sequence calculation.
- Crowning control.
- Servo and frequency inverter control.
- Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
- USB, peripheral interfacing.
- Profile-T offline software.
- Quick, one page programming
- Hotkey navigation
- 7” VGA colour TFT
- Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
- Crowning control
- Tool/material/product library
- USB, peripheral interfacing
- Advanced Y-axis control algorithms for closed loop as well as open loop valves
- 2D graphical touch screen programming mode
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface Profile-TL offline software
- 3D and 2D graphical touch screen programming mode
- 3D visualisation in simulation and production
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface
- Profile-T3D offline software
- Welded steel plate, the frame consists of right and left wall boards, working table, oil box, groove steel etc. Work table consist of 3 plates. The stress of the parts has been eliminated by vibration. The machine enjoys high accuracy and high strength and good rigidity.
- Hydraulic system is from Bosch -Rexroth, Germany.
- Adopt integrated hydraulic control system, more reliable and easy for maintenance.
- Reduced noise: the particular installation choices allow to obtain especially moderate noise levels on machines of average capacity.
- Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
- The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
- Electrical components and materials conform to international standards, safe and reliable, long life, strong anti-interference ability.
- Removable foot switch operation is provided.
- The electronic control components are of high quality and famous brand.
- The machine adopts ac 380V three-phase four-wire power supply, and the control circuit is ac 220V voltage.
- The main circuit of the motor has short circuit, overload and phase loss protection.
- The operation button is installed on the button table of the machine tool, and the electrical switch and indicator light are installed in the special electrical control box.
- The stop button of the oil pump is also the general button of the machine tool. When the oil pump stops working, the whole machine tool stops working.
- The machine is equipped with corresponding inching control button and emergency stop button.
- Guarantees the machine service life and reduce the noise when working.
- High Precision Back gauge is equipped with fine ball screw and guide linear
- Back gauge adopts horizontal installation shell structure with high stability, singe shell double guide rail, high precision, X-axixs drive, automatic CNC system.
CNC Backgauge
The Delem DA52s CNC controlled back gauge that automatically adjusts the X (depth) and R (heightl) axes to ensure your material is always positioned accurately, resulting in higher quality finished parts.
X -axes movements are driven by YASKAWA Servo Motors & Drives. Usingthe best components, such as HIWIN linear guides, ball screws.
X-axes movements Stroke 600mm, with X-axis speeds up to 350 mm/sec and accuracy to 0,01mm & Special design foldable back gauge fingers.
- Up punching dies will be cut into section as the requirement as below:
- 25mm 30mm 40mm 45mm 50mm 170mm 100mm right 100mm left.
- The equipped standard Dies, special non-standard mold is available under client’s requirement according to real workpiece situation.
Electric-Servo Full CNC Press Brake with DA66T Controller
WC67Y NC Press Brake Machine has a whole steel welded structure, with internal stress eliminated by vibration aging technology, high strength, and good rigidity. It also has a torsion bar with hydraulics, an integrated hydraulic system and pressure control for adjustment of tonnage.
Model: MB8
Controller: DA66T（DA52/DA53T/DA58T/DA69T/CT12PS Optional）
Control axes: 3+1 ~ 8+1axis control
Capabilities: 30T/1600 – 600T/6000
The electrolyte servo system of this machine is an inner closing ring control system. It can check out the synchro discrepancies of the slide by the movement of the light ruler. And the electrolyte servo valve can correct the slide discrepancies. This can make the slide always be parallel to the working table. |
CNC control system
CNC control 3 axes (Y1, Y2, X)
Y1, Y2 AXES: control the stroke of left and right cylinder respectively.
X axis: control back gauge;
Optional axes: X1, X2, Z1, Z2, R1, R2
Optional Control system: Delem DA52, DA53T, DA58T, DA66T,DA69T
- CNC Series machines redesigned based on users’ preferences to become a unique machine with its individual electronic and mechanical features.
- CNC Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum level
- with its user-friendly CNC controller and low-cost hydraulic maintenance.
- New CNC is exactly what you need for your production where complicated, sensitive, single or multiple bends on high speed are paramount.
- High quality and repetitive bending are obtained by using synchronized cylinders and valves.
- Automatic utilisation of all axes on startup.
- Rigid upper beam runs on 8-point bearings with bending precision of 0,01 mm.
- Well-known top and bottom tool brands are long lasting hardened and provide precise bending.
- All Bamboo machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel using the latest Technology.
- Chrome coated cylinders are machined with 0,001 mm precision and pistons are specially hardened.
- Original clamps are user friendly and machined with high precision.
- Front support arms are slidable along machine length and easy to adjust.
- Compact and well-known brand Bosch-Rexroth hydraulics are produced according to CE standards.
- Two photocells on sides for rear guard.
- Fast tool tightening.
- Optic linear scales are sensitive up to ± 0,01 mm.
- Synchronized working cylinders will give you the best bending result with its perfect repeatability ratio.
- 2 axis ultra-strong back gauge system (X=1000 mm and R), with ± 0,01 mm. repeatability,
- by CNC controller, foldable back gauge fingers for reverse bending applications.
- SIEMENS electrical system.
- Automatic axis referencing when machine is turned on.
- Side guard is standard meeting CE regulations.
- Safety Standards(2006/42/EC):
1.EN 12622:2009 + A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009 - Front finger Protection (Safety light curtain).
- South Korea Kacon Foot Switch (Level 4 of safety).
- Safety relay with Monitor the pedal switch and safety protection.
In the process of bending, the Angle of the bending workpiece is inconsistent
due to the certain amount of deformation between the slider and the workpiece,
especially the hot-rolled plate of stainless steel, which has large rebound force and large error.
This series bending machine adopts the workbench hydraulic automatic
deflection compensation mechanism, it is composed of a set of oil cylinder
installed in the workbench, and each compensation location of the oil cylinder,
size is according to the slider, finite element analysis of the deflection curve design
compensation table, hydraulic compensation is after the former three vertical plate,
the relative displacement between the neutral version of the convex compensation,
to achieve its principle is accomplished by elastic deformation of steel itself raised,
so the amount of compensation can be realized within the elastic range in the workbench.
Detailed description
- 2D graphical touch screen programming mode
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface Profile-TL offline software
- Quick, one page programming
- Hotkey navigation
- 7” VGA colour TFT
- Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
- Crowning control
- Tool/material/product library
- USB, peripheral interfacing
- Advanced Y-axis control algorithms for closed loop as well as open loop valves
- 2D graphical touch screen programming.
- 15″ high resolution colour TFT.
- Bend sequence calculation.
- Crowning control.
- Servo and frequency inverter control.
- Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
- USB, peripheral interfacing.
- Profile-T offline software.
- 3D and 2D graphical touch screen programming mode
- 3D visualisation in simulation and production
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface
- Profile-T3D offline software
- Welded steel plate, the frame consists of right and left wall boards, working table, oil box, groove steel etc. Work table consist of 3 plates. The stress of the parts has been eliminated by vibration. The machine enjoys high accuracy and high strength and good rigidity.
- Hydraulic system is from Bosch -Rexroth, Germany.
- Adopt integrated hydraulic control system, more reliable and easy for maintenance.
- Reduced noise: the particular installation choices allow to obtain especially moderate noise levels on machines of average capacity.
- Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
- The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
- Electrical components and materials conform to international standards, safe and reliable, long life, strong anti-interference ability.
- Removable foot switch operation is provided.
- The electronic control components are of high quality and famous brand.
- The machine adopts ac 380V three-phase four-wire power supply, and the control circuit is ac 220V voltage.
- The main circuit of the motor has short circuit, overload and phase loss protection.
- The operation button is installed on the button table of the machine tool, and the electrical switch and indicator light are installed in the special electrical control box.
- The stop button of the oil pump is also the general button of the machine tool. When the oil pump stops working, the whole machine tool stops working.
- The machine is equipped with corresponding inching control button and emergency stop button.
- Guarantees the machine service life and reduce the noise when working.
- High Precision Back gauge is equipped with fine ball screw and guide linear
- Back gauge adopts horizontal installation shell structure with high stability, singe shell double guide rail, high precision, X-axixs drive, automatic CNC system.
CNC Backgauge
The Delem DA52s CNC controlled back gauge that automatically adjusts the X (depth) and R (heightl) axes to ensure your material is always positioned accurately, resulting in higher quality finished parts.
X -axes movements are driven by YASKAWA Servo Motors & Drives. Usingthe best components, such as HIWIN linear guides, ball screws.
X-axes movements Stroke 600mm, with X-axis speeds up to 350 mm/sec and accuracy to 0,01mm & Special design foldable back gauge fingers.
- Up punching dies will be cut into section as the requirement as below:
- 25mm 30mm 40mm 45mm 50mm 170mm 100mm right 100mm left.
- The equipped standard Dies, special non-standard mold is available under client’s requirement according to real workpiece situation.
Electric-Servo Full CNC Press Brake with DA69T Controller
WC67Y NC Press Brake Machine has a whole steel welded structure, with internal stress eliminated by vibration aging technology, high strength, and good rigidity. It also has a torsion bar with hydraulics, an integrated hydraulic system and pressure control for adjustment of tonnage.
Model: MB8
Controler:DA69T（DA52/DA53T/DA58T/DA66T/CT12PS Optional）
Control axes: 3+1 ~ 8+1axis control
Capabilities: 30T/1600 – 600T/6000
The electrolyte servo system of this machine is an inner closing ring control system. It can check out the synchro discrepancies of the slide by the movement of the light ruler. And the electrolyte servo valve can correct the slide discrepancies. This can make the slide always be parallel to the working table. |
CNC control system
CNC control 3 axes (Y1, Y2, X)
Y1, Y2 AXES: control the stroke of left and right cylinder respectively.
X axis: control back gauge;
Optional axes: X1, X2, Z1, Z2, R1, R2
Optional Control system: Delem DA52, DA53T, DA58T, DA66T,DA69T
- CNC Series machines redesigned based on users’ preferences to become a unique machine with its individual electronic and mechanical features.
- CNC Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum level
- with its user-friendly CNC controller and low-cost hydraulic maintenance.
- New CNC is exactly what you need for your production where complicated, sensitive, single or multiple bends on high speed are paramount.
- High quality and repetitive bending are obtained by using synchronized cylinders and valves.
- Automatic utilisation of all axes on startup.
- Rigid upper beam runs on 8-point bearings with bending precision of 0,01 mm.
- Well-known top and bottom tool brands are long lasting hardened and provide precise bending.
- All Bamboo machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel using the latest Technology.
- Chrome coated cylinders are machined with 0,001 mm precision and pistons are specially hardened.
- Original clamps are user friendly and machined with high precision.
- Front support arms are slidable along machine length and easy to adjust.
- Compact and well-known brand Bosch-Rexroth hydraulics are produced according to CE standards.
- Two photocells on sides for rear guard.
- Fast tool tightening.
- Optic linear scales are sensitive up to ± 0,01 mm.
- Synchronized working cylinders will give you the best bending result with its perfect repeatability ratio.
- 2 axis ultra-strong back gauge system (X=1000 mm and R), with ± 0,01 mm. repeatability,
- by CNC controller, foldable back gauge fingers for reverse bending applications.
- SIEMENS electrical system.
- Automatic axis referencing when machine is turned on.
- Side guard is standard meeting CE regulations.
- Safety Standards(2006/42/EC):
1.EN 12622:2009 + A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009 - Front finger Protection (Safety light curtain).
- South Korea Kacon Foot Switch (Level 4 of safety).
- Safety relay with Monitor the pedal switch and safety protection.
Detailed description
- 2D graphical touch screen programming mode
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface Profile-TL offline software
- Quick, one page programming
- Hotkey navigation
- 7” VGA colour TFT
- Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
- Crowning control
- Tool/material/product library
- USB, peripheral interfacing
- Advanced Y-axis control algorithms for closed loop as well as open loop valves
- 2D graphical touch screen programming.
- 15″ high resolution colour TFT.
- Bend sequence calculation.
- Crowning control.
- Servo and frequency inverter control.
- Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
- USB, peripheral interfacing.
- Profile-T offline software.
- 3D and 2D graphical touch screen programming mode
- 3D visualisation in simulation and production
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface
- Profile-T3D offline software
- Welded steel plate, the frame consists of right and left wall boards, working table, oil box, groove steel etc. Work table consist of 3 plates. The stress of the parts has been eliminated by vibration. The machine enjoys high accuracy and high strength and good rigidity.
- Hydraulic system is from Bosch -Rexroth, Germany.
- Adopt integrated hydraulic control system, more reliable and easy for maintenance.
- Reduced noise: the particular installation choices allow to obtain especially moderate noise levels on machines of average capacity.
- Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
- The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
- Electrical components and materials conform to international standards, safe and reliable, long life, strong anti-interference ability.
- Removable foot switch operation is provided.
- The electronic control components are of high quality and famous brand.
- The machine adopts ac 380V three-phase four-wire power supply, and the control circuit is ac 220V voltage.
- The main circuit of the motor has short circuit, overload and phase loss protection.
- The operation button is installed on the button table of the machine tool, and the electrical switch and indicator light are installed in the special electrical control box.
- The stop button of the oil pump is also the general button of the machine tool. When the oil pump stops working, the whole machine tool stops working.
- The machine is equipped with corresponding inching control button and emergency stop button.
- Guarantees the machine service life and reduce the noise when working.
- High Precision Back gauge is equipped with fine ball screw and guide linear
- Back gauge adopts horizontal installation shell structure with high stability, singe shell double guide rail, high precision, X-axixs drive, automatic CNC system.
CNC Backgauge
The Delem DA52s CNC controlled back gauge that automatically adjusts the X (depth) and R (heightl) axes to ensure your material is always positioned accurately, resulting in higher quality finished parts.
X -axes movements are driven by YASKAWA Servo Motors & Drives. Usingthe best components, such as HIWIN linear guides, ball screws.
X-axes movements Stroke 600mm, with X-axis speeds up to 350 mm/sec and accuracy to 0,01mm & Special design foldable back gauge fingers.
- Up punching dies will be cut into section as the requirement as below:
- 25mm 30mm 40mm 45mm 50mm 170mm 100mm right 100mm left.
- The equipped standard Dies, special non-standard mold is available under client’s requirement according to real workpiece situation.
Electric-Servo Full CNC Press Brake with CT12 Controller
WC67Y NC Press Brake Machine has a whole steel welded structure, with internal stress eliminated by vibration aging technology, high strength, and good rigidity. It also has a torsion bar with hydraulics, an integrated hydraulic system and pressure control for adjustment of tonnage.
Model: MB8
Controller: CT12PS（DA52/DA53T/DA58T/DA66T/DA69T Optional）
Control axes: 3+1 ~ 8+1axis control
Capabilities: 30T/1600 – 600T/6000
The electrolyte servo system of this machine is an inner closing ring control system. It can check out the synchro discrepancies of the slide by the movement of the light ruler. And the electrolyte servo valve can correct the slide discrepancies. This can make the slide always be parallel to the working table. |
CNC control system
CNC control 3 axes (Y1, Y2, X)
Y1, Y2 AXES: control the stroke of left and right cylinder respectively.
X axis: control back gauge;
Optional axes: X1, X2, Z1, Z2, R1, R2
Optional Control system: Delem DA52, DA53T, DA58T, DA66T,DA69T
- CNC Series machines redesigned based on users’ preferences to become a unique machine with its individual electronic and mechanical features.
- CNC Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum level
- with its user-friendly CNC controller and low-cost hydraulic maintenance.
- New CNC is exactly what you need for your production where complicated, sensitive, single or multiple bends on high speed are paramount.
- High quality and repetitive bending are obtained by using synchronized cylinders and valves.
- Automatic utilisation of all axes on startup.
- Rigid upper beam runs on 8-point bearings with bending precision of 0,01 mm.
- Well-known top and bottom tool brands are long lasting hardened and provide precise bending.
- All Bamboo machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel using the latest Technology.
- Chrome coated cylinders are machined with 0,001 mm precision and pistons are specially hardened.
- Original clamps are user friendly and machined with high precision.
- Front support arms are slidable along machine length and easy to adjust.
- Compact and well-known brand Bosch-Rexroth hydraulics are produced according to CE standards.
- Two photocells on sides for rear guard.
- Fast tool tightening.
- Optic linear scales are sensitive up to ± 0,01 mm.
- Synchronized working cylinders will give you the best bending result with its perfect repeatability ratio.
- 2 axis ultra-strong back gauge system (X=1000 mm and R), with ± 0,01 mm. repeatability,
- by CNC controller, foldable back gauge fingers for reverse bending applications.
- SIEMENS electrical system.
- Automatic axis referencing when machine is turned on.
- Side guard is standard meeting CE regulations.
- Safety Standards(2006/42/EC):
1.EN 12622:2009 + A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009 - Front finger Protection (Safety light curtain).
- South Korea Kacon Foot Switch (Level 4 of safety).
- Safety relay with Monitor the pedal switch and safety protection.
In the process of bending, the Angle of the bending workpiece is inconsistent
due to the certain amount of deformation between the slider and the workpiece,
especially the hot-rolled plate of stainless steel, which has large rebound force and large error.
This series bending machine adopts the workbench hydraulic automatic
deflection compensation mechanism, it is composed of a set of oil cylinder
installed in the workbench, and each compensation location of the oil cylinder,
size is according to the slider, finite element analysis of the deflection curve
design compensation table, hydraulic compensation is after the former three vertical plate,
the relative displacement between the neutral version of the convex compensation,
to achieve its principle is accomplished by elastic deformation of steel itself raised,
so the amount of compensation can be realized within the elastic range in the workbench.
Detailed description
- Controls 4 axes.
- Automatic bend sequencing (option).
- Bend allowance calculation.
- Pressure – crowning calculation.
- Modular tools for each part or bend.
- Angle and back gauge correction.
- Telemaintenance via wireless connection with PC or notebook.
- USB port for memory stick for data transfer/backup.
- CybTouch 12 PS is specifically developed for synchronized press-brakes.
- As part of the CybTouch range, it has an intuitive and vivid color touch screen and a high integration of functions.
- With its interactive touch software interface with large keys, its 2D graphic display, on-line help, and many other automatic functions that constantly guide the operator,CybTouch 12 is very easy to operate.
- CybTouch 12 comes with a robust, modern and streamlined housing specially designed to be mounted on an arm.
- Quick, one page programming
- Hotkey navigation
- 7” VGA colour TFT
- Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
- Crowning control
- Tool/material/product library
- USB, peripheral interfacing
- Advanced Y-axis control algorithms for closed loop as well as open loop valves
- 2D graphical touch screen programming.
- 15″ high resolution colour TFT.
- Bend sequence calculation.
- Crowning control.
- Servo and frequency inverter control.
- Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
- USB, peripheral interfacing.
- Profile-T offline software.
- 2D graphical touch screen programming mode
- 17″ high resolution colour TFT
- Full Windows application suite
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the controllers multitasking environment
- Sensor bending & correction interface Profile-TL offline software
- Welded steel plate, the frame consists of right and left wall boards, working table, oil box, groove steel etc. Work table consist of 3 plates. The stress of the parts has been eliminated by vibration. The machine enjoys high accuracy and high strength and good rigidity.
- Hydraulic system is from Bosch -Rexroth, Germany.
- Adopt integrated hydraulic control system, more reliable and easy for maintenance.
- Reduced noise: the particular installation choices allow to obtain especially moderate noise levels on machines of average capacity.
- Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
- The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
- Electrical components and materials conform to international standards, safe and reliable, long life, strong anti-interference ability.
- Removable foot switch operation is provided.
- The electronic control components are of high quality and famous brand.
- The machine adopts ac 380V three-phase four-wire power supply, and the control circuit is ac 220V voltage.
- The main circuit of the motor has short circuit, overload and phase loss protection.
- The operation button is installed on the button table of the machine tool, and the electrical switch and indicator light are installed in the special electrical control box.
- The stop button of the oil pump is also the general button of the machine tool. When the oil pump stops working, the whole machine tool stops working.
- The machine is equipped with corresponding inching control button and emergency stop button.
- Guarantees the machine service life and reduce the noise when working.
- High Precision Back gauge is equipped with fine ball screw and guide linear
- Back gauge adopts horizontal installation shell structure with high stability, singe shell double guide rail, high precision, X-axixs drive, automatic CNC system.
CNC Backgauge
The Delem DA52s CNC controlled back gauge that automatically adjusts the X (depth) and R (heightl) axes to ensure your material is always positioned accurately, resulting in higher quality finished parts.
X -axes movements are driven by YASKAWA Servo Motors & Drives. Usingthe best components, such as HIWIN linear guides, ball screws.
X-axes movements Stroke 600mm, with X-axis speeds up to 350 mm/sec and accuracy to 0,01mm & Special design foldable back gauge fingers.
- Up punching dies will be cut into section as the requirement as below:
- 25mm 30mm 40mm 45mm 50mm 170mm 100mm right 100mm left.
- The equipped standard Dies, special non-standard mold is available under client’s requirement according to real workpiece situation.